Enable Port Forwarding - NETGEAR Telstra Wi-Fi 4G Advanced II AirCard 790S User Manual

Enable Port Forwarding

If your computer is hosting a server, you can enable port forwarding so that other users can
access the server.

To enable port forwarding:
1. From a computer or wireless device that is connected to your network, launch an
Internet browser.
2. Enter http://m.home or http://192.168.1.1.
A login screen displays.
3. Enter the administrator login password.
The default password is admin. The password is case-sensitive.
The Home screen displays.
4. Select Settings > Router > Port Forwarding.
5. Select the Enable radio button.
The Port Forwarding list displays.
Incoming traffic is forwarded to specific ports and devices on your network using their
local IP addresses.
Note: Port forwarding creates a security risk. When not required, disable port
forwarding.
6. Enter the following port forwarding information:
• Label. Enter a descriptive name.
• IP. Enter the IP address of a connected device.
• Port. Enter the port number that the application uses.
• Protocol. If you are unsure, select TCP/IP.
The Submit button displays after you make a selection.
7. Click the Submit button.
Telstra Wi-Fi 4G Advanced II
Advanced Settings
82