Adjusting The Volume Of The Transmission; Adjusting The Volume Of The Ring Tone - Sennheiser D 10 series Instruction Manual

Configuring the headset system
&
19 | D 10 series

Adjusting the volume of the transmission

Adjusting the microphone volume of the call transmission
By default, the microphone volume control is set to position 4. This setting
is suitable for most telephones.
Make a call to someone who will help you find the correct sensitivity
setting for your microphone.
Turn the microphone volume control so that the other party can hear
you at a comfortable level.
Adjusting the microphone volume of the USB transmission
Some softphones adjust the microphone sensitivity automatically.
Activate this function in order to be able to optimally use the
microphone and, via your operating system, adjust the microphone
sensitivity so that the other party can hear you at a comfortable level
(see the Help function of your operating system).

Adjusting the volume of the ring tone

Adjusting the headset's ring tone volume and the volume of the acoustic
signals
Make sure that the headset is in standby mode (the Link LED
base station is off). If necessary, press the Link button on the headset.
To adjust the volume, move the Audio button as shown in the diagram.
When the minimum or maximum volume is reached, you hear a double
beep in the headset.
Adjusting the ring tone volume of the base station
Turn the volume control to reduce or increase the ring tone volume.
on the
Ring Volume