Connecting The Base Station To A Computer; Charging The Headset Before First Use - Sennheiser D 10 series Instruction Manual

Setting up and connecting the base station
13 | D 10 series

Connecting the base station to a computer

Connect the USB cable to the
station and to a USB socket of your computer. The operating system
detects the USB audio device "Sennheiser D 10" and installs the neces-
sary drivers.
Sennheiser PC software
The free Sennheiser PC software allows you to add value to your
Sennheiser products. The Sennheiser Updater, for example, facilitates easy
updating of products with new software. For more information, visit our
website at www.sennheiser.com/cco/software.

Charging the headset before first use

Charge the rechargeable battery for at least 20 minutes without
interruption before using it for the first time. A complete charging process
takes about 60 minutes (see page 29).
During the first charging process, it may take up to 5 minutes until the
Headset LED lights up blue.
PC socket (marked orange) on the base