Making calls using the headset
23 |
D 10 series
Calling via the fixed line phone using the headset
Establishing/disconnecting a wireless link
If you want to use the headset to accept, make or end calls, you have to
establish a wireless link between headset and base station. You can choose
between manual and automatic link establishment (see "Auto Link" on
page 17).
Press the Link button on the headset.
– The link is established. The Link LED
blue and the Headset LED flashes blue slowly.
OR
– The link is disconnected. The Link LED
Headset LED go off. The headset is in standby mode.
connected
disconnected
If your telephone has a built-in electronic hook switch supporting
the MSH standard, you can only disconnect the wireless link between
headset and base station by placing the headset into the base
station.
Managing calls without using a call control functionality
Accepting a call: You hear the ring tone of the fixed line phone. Press the
Link button on the headset. Lift the handset or press the "accept call"
button on your fixed line phone.
Making a call: Press the Link button on the headset to establish a link
between base station and headset. Lift the handset and dial the desired
number. The phone connection is established.
Ending a call: Hang up the handset or press the "end call" button on your
fixed line phone.
on the base station lights up
on the base station and the
connected
disconnected