Connecting The Base Station To An Optional Electronic Hook Switch Control (Ehs) - Sennheiser D 10 series Instruction Manual

Setting up and connecting the base station
Connecting the base station to an optional electronic
hook switch control (EHS)
The necessary EHS connection cables as well as adapter cables for manu-
facturer specific standards are available as optional accessories from your
Sennheiser partner. The corresponding quick guides are supplied with
the cables or can be found on the product page on our website at
www.sennheiser.com/cco.
By way of example of a Siemens and an Alcatel adapter cable, the following
describes how to connect the base station to an electronic hook switch.
1 Connect the base station to the fixed line phone.
2 Use a pointed object (e.g. a ball pen) to set the DIP switch to the posi-
tion shown.
Siemens, Agfeo, Aastra, Auerswald, etc.
1
Alcatel
1
For an overview of the available connection and adapter cables, visit
the D 10 series
www.sennheiser.com/cco or contact your Sennheiser partner.
2
2
product page on our website at
D 10 series | 12