Replacing The Fuse - SATO M-8485Se Operator's Manual

Section 4.cleaning and Maintenance

REPLACING THE FUSE

Supplies needed:
1. Turn the printer power off and remove the power cable.
2. On the back of the printer, locate the Fuse Cap directly above the AC connector.
3. Unscrew the cap and remove the defective fuse.
4. Replace with a new 250V 15A fuse.
5. Screw the fuse cap back onto the printer and replace the power cable.
AC Fuse
AC Input
Connector
Page 4-6
250V 15A Fuse
SATO "Se" Print Engines