General Printer Specifications - SATO M-8485Se Operator's Manual

General Printer Specifications (All Models)
SPECIFICATION
PRINT
Method
Speed (User Selectable)
Print Module (Dot Size)
Resolution
Maximum Print Width
Maximum Print Length
MEDIA
Minimum Width
Minimum Length
Maximum Width
Type
Maximum Caliper
Max Unwind Torque
Backing Paper Rewind Tension
LABEL SENSING
Gap
Reflective I-Mark
RIBBON
Maximum Width
Minimum Width
Length
All specifications subject to change without notice.
1
Minimum label length at print speeds greater than 6 ips is 1.0 in.
Page i
M-8485Se M-8460Se/
M-8465Se
Direct or Thermal Transfer
4 to 12 ips 4, 6, 8 ips
100 to 300 mm/s 100 to 200 mm/s
.0049 in./.125 mm (8485/8460Se)
.0033 in./.083 mm (8465Se)
203 dpi/ 8 dpmm (8485/8460Se)
305 dpi/ 12 dpmm (8465Se)
5.0 in.
128 mm 152 mm
1024 dots 1216 dots
49.2 in, (except 8465Se: 32.8 in.)
1249 mm / (8465Se: 833 mm)
1.0 in. (25 mm) 2.0 in. (53mm)
.25 in. (6 mm) 0.6 in. (15 mm)
5.25 in. 6.25 in.
134 mm 165 mm
Die Cut Labels, Fan-Folded or Continuous
0.10 in. – 0.18mm (Dispensable)
0.10 mm – 0.25 mm (Continuous mode)
8.8 lbs (4 Kg) with 5 in. wide labels
5.25 in.
134 mm
1.55 in.
39.5 mm
1968 ft (600 M)
M-8490Se
4 to 8 ips
100 to 200 mm/s
.0033 in
.083 mm
305 dpi
12 dpmm
6.0 in. 4.4 in.
112 mm
1344 dots
32.8 in.
833 mm
1.0 in. (25 mm)
.25 in. (6 mm)
5.25 in.
134 mm
400g or less
Adjustable
Fixed
6.25 in. 5.25 in.
165 mm 134 mm
1.55 in. 1.55 in.
39.5 mm 39.5 mm
M-8459Se
Direct Only
2 to 5 ips
50 to 125 mm/s
.0049 in.
.125 mm
203 dpi
8 dpmm
4.4 in.
112 mm
896 dots
49.2 in.
1249 mm
1.0 in. (25 mm)
.25 in. (6 mm)
5.25 in.
134 mm
N/A
N/A
N/A