Mounting The Bottom V-Belt Guard; Mounting The Spool Holder - Pfaff 1163 Instruction Manual

8

Mounting the bottom V-belt guard

.01.07
Fig. 8 - 07
8

Mounting the spool holder

.01.08
Fig. 8 - 08
Installation and commissioning
● Adjust bottom -V-belt guard 1 so that the
motor pulley and V-belt run freely.
Please note the instructions
in the operating manual of
the drive for information on
parameter settings.
1
● Mount the spool holder as shown in
Fig. 8-08.
● Insert the spool holder into the hole in
the table top and fasten it with the nuts
enclosed.
21