Mounting The Bottom V-Belt Guard; Fitting The Thread Guide - Pfaff 9063 Instruction Manual

Mounting and commissioning the machine
8

Mounting the bottom V-belt guard

.01.08
8

Fitting the thread guide

.01.09
8 - 7
Fig. 8 - 09
1
Fig. 8 - 10
● Align V-belt guard 1 so that the motor
pulley and V-belt are run freely.
● Tighten screw 2.
2
1
● Fit the tapered thread guide pin 1 into the
corresponding hole in the machine
housing.