Winding The Bobbin Thread / Adjusting The Preliminary Thread Tension - Pfaff 1163 Instruction Manual

Preparation
9

Winding the bobbin thread / adjusting the preliminary thread tension

.02
4
1
2
3
Fig. 9 - 02
● Place empty bobbin 1 on the bobbin winder spindle 2.
● Thread the thread as shown in Fig. 9.02 and wind it around the bobbin 1 a few times in a
clockwise direction.
● Switch on the bobbin winder by pressing lever 3 in the direction of the arrow.
Bobbin 1 is fi lled during sewing.
● The tension of the thread on bobbin 1 can be adjusted with milled screw 4.
● The bobbin winder stops automatically, when bobbin 1 is suffi ciently full.
● To adjust the amount of thread turn the screw on lever 3.
25