Adjusting The Lubrication; Lubricating The Needle Head Parts; Hook Lubrication - Pfaff 1163 Instruction Manual

Care and maintenance
10

Adjusting the lubrication

.04
10

Lubricating the needle head parts

.04.01
10

Hook lubrication

.04.02
30
max.
off
1
Fig. 10 - 03
1
Fig. 10 - 04
Switch off the machine!
Danger of injury due to uninten-
tional starting of the machine!
● The needle head parts should be adequa-
tely lubricated without oil dripping out of
the head part.
● Turn eccentric 1 to adjust the oil volu-
me for lubricating the needle head parts.
While doing say pay attention to the mar-
king on eccentric 1 (see arrow).
The following adjustments may
only be carried out by appropri-
ately trained personnel.
● Remove the needle.
● Dismount the needle plate and bottom
feed dog.
● Place a sheet of paper over the needle
plate cutout and start the machine run-
ning.
● If a thin streak of oil is visible on the pa-
per after a running time of approx. 10 se-
conds at top speed, the hook lubrication
is set correctly.
● To adjust the amount of oil, turn adjust-
ment screw 1.