Soft Switch - Yamaha RX-V750 Service Manual

16. SOFT SWITCH

This menu is used to switch the function settings on
P.C.B. through the software so as to activate the product.
The protection function follows the P.C.B. settings.
When connected to AC or in the maker preset state, the
unit is initialized to the P.C.B. setting. Display of each
function after initialization varies depending on settings on
P.C.B. The operation mode can be changed by selecting
the sub-menu and then using the STRAIGHT key. With
SOF selected for the SW mode, the settings become
effective.
16.SW
16.MODEL:V750
16.DEST :J
16.TUNER:EXIST
16.RDS
16.ZONE2:NOT
16.VIDEO:NTSC
:PCB
:NOT
RX-V750/DSP-AX750/DSP-AX750SE
Sub-menu Function
Switch mode
Model setting
Destination
Tuner
Rds
Znone 2
Video format
RX-V650/HTR-5760
Choice
PCB/SOFT
V450/H5750/V550/
H5760/V650/UNDEF/V750
J/UC/ATKBG/RL
NOT/EXIT
NOT/EXIT
NOT/EXIT
NTSC/PAL
45