Yamaha RX-V757 Service Manual

Yamaha RX-V757 Service Manual

Av receiver/av amplifier
Hide thumbs Also See for RX-V757:

Advertisement

RX-V757/DSP-AX757/DSP-AX757SE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT:
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and
specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING:
IMPORTANT:

CONTENTS

TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . . 2–3
FRONT PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–5
REMOTE CONTROL PANELS . . . . . . . . . . . . . . . . . . 6
REAR PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–12
SPECIFICATIONS /
参考仕様 . . . . . . . . . . . . . . . . .
INTERNAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DISASSEMBLY PROCEDURES /
. . . . . . . . . . . . . . . . . . . . 28–49
自己診断機能(ダイアグ)
アンプ部調整 . . . . . . . . . . . . . . .
1 0 0 9 3 9
AV RECEIVER/AV AMPLIFIER
RX-V657/HTR-5860

IMPORTANT NOTICE

Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA
Retailer or the appointed service representative.
The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
13–17
19–27
分解手順 . . . . .
50
SERVICE MANUAL
SERVICE MANUAL
Display Data . . . . . . . . . . . . . . . . . . . . . . . . . . 51–52
Ic Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53–61
Pin Connection DIAGRAM . . . . . . . . . . . . . . . . . 62
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . 63–64
PRINTED CIRCUIT BOARD . . . . . . . . . . . . . . . . 65–84
Schematic Diagram . . . . . . . . . . . . . . . . . . . 85–95
PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97–133
REMOTE CONTROL RAV272, RAV273 . . . . 134–135
REMOTE CONTROL RAV252, RAV253 . . . . 136–137
'05.03

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha RX-V757

  • Page 1: Important Notice

    This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.
  • Page 2 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 SELF DIAGNOSIS FUNCTION (DIAG) / 自己診断機能 (ダイアグ) This product has a built-in self diagnosis function (DIAG) to 本機には、 検査、 測定、 不良個所の発見を目的にした自己診 facilitate inspection, measurement and determination of a 断機能 (ダイアグ) があります。 faulty item, if any. There are 20 DIAG menu items, each hav- ダイアグメニューは20種類あり、...
  • Page 3 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 No. DIAG menu Sub-menu 8. BS1 : 9. BS2 : 10. BS3 : 11. BS4 : 12. BS5 : 13. BS6 : 14. BS7 : 15. BS8 : 16. MTT : 17. DGI : 14 DSP BUS CHECK 1.
  • Page 4 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 ダイアグの起動 Starting DIAG ● 本体の “INPUT MODE” キーと “MULTI CH INPUT” キー Press the “STANDBY/ON” key of the main unit while simul- を同時に押しながら、 “STANDBY/ON” キーを押すとダ taneously pressing the “INPUT MODE” key and the “MULTI イアグが起動します。 CH INPUT” key to activate the DIAG function.
  • Page 5 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 Display provided when DIAG started ダイアグ起動時の表示 ● When the monitor is connected, DIAGNOSTIC MENU モニターを接続してある場合は、モニターの画面に図の ようにダイアグメニューが表示されます。 appears on its screen as shown in the figure. 本体FLディスプレイには、オープニング (プロテクショ On the FL display of the main unit, an opening message ン履歴/バージョン)...
  • Page 6 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 The protection function worked due to a de- 電源電圧による原因で、プロテクションが PS PRT :000 Z fect or overload in the power supply. If the 働いたことを示します。異常状態のままパ power is turned on with the abnormality un- ワーオンすると、約1秒後にプロテクション solved, the protection function works in about が掛かり、電源が切れます。...
  • Page 7 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 ダイアグメニューとサブメニューの操作 Operation procedure of DIAG MENU and SUB-MENU ダイアグにはNo.1∼20のメニューがあり、さらにいくつ かのサブメニューがあります。 There are 20 MENU items, each of which has some SUB- MENU items. ダイアグメニューの選択 PROGRAMツマミで選択します。  DIAG menu selection Select the menu using PROGRAM knob. サブメニューの選択 PRESET/TUNING w (順送り) 、q (逆送り) キーで選択し...
  • Page 8 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 Details of DIAG menu ダイアグメニュー詳細 1. BYPASS 1. BYPASS Using the sub-menu, it is possible to select analog bypass サブメニューにより ANALOG BYPASS/DSP BYPASS が選 output or DSP bypass output. 択可能です。 ANALOG BYPASS ANALOG BYPASS 1.ANALOG BYPAS INPUT: DVD ANALOG...
  • Page 9 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 2. RAM THROUGH 2. RAM THROUGH Using the sub-menu, it is possible to select margin output or サブメニューにより MARGIN/Full Bit が選択可能です。 full-bit output. RAM MARGIN RAM MARGIN Following head margin is reserved. 以下のヘッドマージンを取ります。 FRONT CENTER SURROUND SURROUND BACK...
  • Page 10 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 3. PRO LOGIC 3. PRO LOGIC • Dolby PRO LOGIC is applied to input stereo source. ・入力 2ch 信号に Dolby PRO LOGIC 処理を行います。 3.PRO LOGIC INPUT: DVD ANALOG Input level Volume SUBWOOFER SPEAKERS OUT (1KHz) FRONT L/R CENTER...
  • Page 11 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 4. SPEAKERS SET 4. SPEAKERS SET The analog switch settings for each sub-menu are as shown 各サブメニューにおけるアナログスイッチの設定は以下の in the table below. 通りです。 • “F mix” is Mixing Presence to Front. ・F mixはPresenceをFront mixするかどうかです。 Sub-menu FRONT CENTER SUR. SUR.B...
  • Page 12 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 INPUT: DVD ANALOG SPEAKERS OUT (1KHz) Input level Volume SUBWOOFER Sub-menu CENTER SUR L/R SUR.B L/R FRONT L/R (50 Hz) Both ch, -20 dBm +6.5 dB +13.0 dBm + 13.0 dBm +13.0 dBm +13.0 dBm +3.5 dBm 1 FRONT: SML 0dB - ∞...
  • Page 13 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 7. VFD CHECK 7. VFD CHECK • This program is used to check the FL display section ・FL 表示部と映像制御部のチェックプログラムです。サブ and video control section. The display condition varies メニュー操作により、表示状態が以下のように変わりま as shown below according to the sub-menu operation. す。 • The signal route is STRAIGHT.
  • Page 14 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 8. MANUAL TEST 8. MANUAL TEST The test noise based THX is output to the channel specified DSP からサブメニューで指定したチャンネルへ THX 準拠 by the sub-menu from the DSP. のテストノイズを出力します。 8.TEST ALL 8.TEST FRNT L 8.TEST CENTER 8.TEST FRNT R 8.TEST SURR R...
  • Page 15 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 9. FACTORY PRESET 9. FACTORY PRESET This menu is used to reserve/inhibit initialization of the back- バックアップ用RAM (音場プログラムのパラメーターや up RAM (Parameters and set menu contents, etc. of the セットメニュー内容等) の初期化を予約/禁止します。 sound field program). PRESET INHIBIT (Initialization inhibited) / PRESET INHIBIT (初期化禁止)...
  • Page 16 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 10. AD DATA CHECK 10. AD DATA CHECK With this sub-menu used, the key scanning, A/D value of the キースキャン、 異常検出 (プロテクション) ポート電圧のA/D voltage at the abnormality detect (protection) port, etc. are 値などを表示します。 displayed. The A/D conversion value is displayed in %.
  • Page 17 [Table 1] [Table 1] RX-V757 (U, C, A, G models) / RX-V657 (U, C, A, B, G, E models) RX-V757 (R, T, K models) / DSP-AX757 (J model) / RX-V657 (R, T, K, L models) Display (%) Display (%) 0 - 6...
  • Page 18 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 11. V CONV STATUS 11. V CONV STATUS The data received from the video conversion IC (TA1270) ビデオコンバージョンIC (TA1270)からの受信データを表 is displayed. 示します。 * The numeric value in the diagram is for reference. ※図中の数値は参考例です。 LOW BYTE DATA LOW BYTE DATA...
  • Page 19 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 Digital input/output setting value <1st byte> デジタル入出力設定値 <第1 バイト> Upper 4 bits: REC OUT selected / 上位4bit REC OUT 選択 / lower 4 bits: INPUT selected 下位4bit INPUT 選択 Value Choice Preset name NONE OPT FRONT V-AUX OPT 1...
  • Page 20 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 DIF: DIR information DIF : DIR情報 Not applied to these models. このモデルには適用されません。 DIF:1401000600 PC: Preamble C information PC : Preamble C情報 Not applied to these models. このモデルには適用されません。 PC:0000 CS1, 2: Channel status information CS1, 2 : チャンネルステータス情報 Not applied to these models.
  • Page 21 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 15. SWFR CUT OFF 15. SWFR CUT OFF The cut off frequency setting of LFE. LFE出力のカットオフ周波数を設定できます。 Low-pass filter setting. ローパスフィルタの設定です。 It can be selected 40Hz to 200Hz STAIGHTキーにより、 40Hz ∼ 200Hz 15.LFE LPF 40 every 10Hz by the STRAIGHT key.
  • Page 22 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 SW MODE: PCB, MODEL or FNC can be selected. SW MODE:PCB、MODELまたはFNCを選択できます。 18.SW :PCB MODEL SETTING:V757、V657、H5860、V557、V457、 MODEL SETTING: V757, V657, H5860, V557, V457, H5850 or V357 can be selected. (SW MODE: Selectable when H5850、V357のいずれかを選択できます。 (SW MODE: MODEL has been selected.) MODEL時選択できます。)...
  • Page 23 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 OSD: NOT or EXIST can be selected. (SW MODE: Select- OSD:NOTまたはEXISTを選択できます。 (SW MODE: able when FNC has been selected.) FNC時選択できます。) 18.OSD :NOT YPAO:NOTまたはEXISTを選択できます。 (SW MODE: YPAO: NOT or EXIST can be selected. (SW MODE: Select- able when FNC has been selected.) FNC時選択できます。)...
  • Page 24: Amp Adjustment

    RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 AMP ADJUSTMENT / アンプ部調整 アイドリング電流確認 CONFIRMATION OF IDLING CURRENT 1. Immediately after the power is turned on, measure the 1. 電源投入直後、 下表のA欄の抵抗の端子間電圧を測定し、 voltage across resistor terminals in the column “A” in the 0.1mV ∼ 10.0mV であることを確認してください。 table below and confirm that the measured value is be- 2.
  • Page 25: Display Data

    RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 DISPLAY DATA V801 : 17-BT-24GNK (WE289300) PATTERN AREA PIN CONNECTION Note 1) F1, F2 ..Filament 2) NP ....No Pin 3) NX ....No Extend Pin 4) P1~P37 ..Datum Line 5) 1G~17G ..Grid GRID ASSIGNMENT...
  • Page 26 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 SEGMENT DESIGNATION ANODE CONNECTION...
  • Page 27 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 IC DATA IC2 : LC89057W-VF4D-E (DSP P.C.B.) Digital Audio Interface Transceiver SDIN SLRCK SBCK RDATA XMODE RLRCK DGND DVDD LC89057W-VF4D-E DVDD DGND TMCK/PIO0 RBCK TBCK/PIO1 RMCK TLRCK/PIO2 AGND TDATA/PIO3 AVDD TXO/PIOE *: Pull-down resistor internal RXOUT Microcontroller Cbit, Ubit...
  • Page 28 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 IC2 : LC89057W-VF4D-E (DSP P.C.B.) Digital Audio Interface Transceiver Name Function RXOUT Input bi-phase selection data output pin TTL-compatible digital data input pin Coaxial-compatible digital data input pin with built-in amplifier TTL-compatible digital data input pin TTL-compatible digital data input pin...
  • Page 29 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 IC5 : D60YA003BPYP225 (DSP P.C.B.) Decoder Digital Signal Processors EMIF32 L2 Cache/ L1P Cache Memory Direct Mapped 4 Banks McASP1 4K Bytes Total 64K Bytes Total McASP0 (4-Way) C67x McBSP1 Control Instruction Fetch Registers McBSP0 Instruction Dispatch Control...
  • Page 30 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 IC5 : D60YA003BPYP225 (DSP P.C.B.) Decoder No. Name Function 41 SCL0 I2C0 clock 42 SDA0 I2C0 data 43 CVDD 1.2V power supply 44 DVDD 3.3V power supply 45 VSS Ground 46 CVDD 1.2V power supply 47 DVDD 3.3V power supply...
  • Page 31 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 IC5 : D60YA003BPYP225 (DSP P.C.B.) Decoder No. Name Function 99 EA17 For external memory, Address 17 (Unconnected) 100 EA19 For external memory, Address 19 (Unconnected) 101 EA20 For external memory, Address 20 (Unconnected) 102 /CE0 For external memory area, Enable 0...
  • Page 32 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 IC5 : D60YA003BPYP225 (DSP P.C.B.) Decoder No. Name Function 157 CVDD 1.2V power supply 158 VSS Ground 159 AHCLKX1 McASP1 transmission MCLK 160 GP0[8] General purpose I/O0 port 8 161 AHCLKR1 McASP1 reception MCLK 162 DVDD 3.3V power supply...
  • Page 33 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 IC451 : M30622MWP-xxxFP (SUBTRANS P.C.B.) 16 bit µ-COM (CPU) P07/D7 P44/CS0 P06/D6 P45/CS1 P05/D5 P46/CS2 P04/D4 P47/CS3 P03/D3 P50/WRL/WR P02/D2 P51/WRH/BHE P01/D1 P52/RD P00/D0 P53/BCLK P107/AN7/K13 P54/HLDA P106/AN6/K12 P55/HOLD P105/AN5/K11 P56/ALE P104/AN4/K10 P57/RDY/CLKOUT P103/AN3 P60/CTS0/RTS0 P102/AN2 P61/CLK0 P101/AN1...
  • Page 34 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 IC451 : M30622MWP-xxxFP (SUBTRANS P.C.B.) 16 bit µ-COM (CPU) Port Name Function SDA0 DTCV VIDEO Conversion DATA SCL0 CKCV VIDEO Conversion Clock HEAD PHONE Detect /MTHP HEAD PHONE Mute Output /MTCT MUTE Center /MTSW MUTE SW /EMP For Flash Writing (LO)
  • Page 35 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 IC903 : BU2092F-E2 (FUNCTION P.C.B.) RX-V757 (U, C, A, G models), RX-V657 (U, C, A, B, G, E models) Key Input(A-D) Pull-Up Resistance 10 k-Ohms Serial In/Parallel Out Driver + 0.0 k + 1.0 k + 1.0 k + 1.5 k...
  • Page 36 6,25 OUT4 31,30 Muting or ZONE2 OUT5 Q311,312 Surr.Back Surr.Back VCR2/DVR OUT3 ZONE2 [RX-V757 (U, C, A, G), RX-V657 (U, C, A, B, G, E) models] *Selectable TUNER [DSP-AX757SE model] with PL/PR 5/26 Center RY123 Muting Muting ZONE2 Z2L/Z2R or Z2L/Z2R...
  • Page 37 FL DRIVER SERIAL CONTROL VIDEO CONVERSION V801 IC801 SELECTOR/VOLUME XL451 POWER RELAY POWER SAVE 16MHz ZONE2 SELECTOR RX-V757 (U, C, A, G, E) / RX-V657 (U, C, A, B, G, E) models SUBTRANS • See page 92, 93 → SCHEMATIC DIAGRAM...
  • Page 38 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 SCHEMATIC DIAGRAM (DSP 1/2) RX-V757/DSP-AX757/DSP-AX757SE/RX-V657 Page 92 TO SUBTRANS (2) CB457 RX-V757/DSP-AX757/DSP-AX757SE/RX-V657 Page 88 TO OPERATION (5) W881 HTR-5860 Page 93 TO SUBTRANS (2) CB457 HTR-5860 Page 89 TO OPERATION (4) W881 REGULATOR J, R, T, K, A, B, G, E, L...
  • Page 39 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 SCHEMATIC DIAGRAM (DSP 2/2) RX-V757/DSP-AX757/DSP-AX757SE/RX-V657 Page 88 Page 87 TO OPERATION (5) W807 IC17–21 : NE5532DR Dual OP-Amp TO FUNCTION (1) W303 Page 87 HTR-5860 Page 89 TO OPERATION (4) W807 TO FUNCTION (1) CB305 ANALOG IN –IN –...
  • Page 40 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 SCHEMATIC DIAGRAM (FUNCTION) RX-V757/DSP-AX757/DSP-AX757SE/RX-V657 Page 92 TO SUBTRANS (2) CB461 RX-V757/DSP-AX757/DSP-AX757SE/RX-V657 Page 92 TO SUBTRANS (2) CB459 HTR-5860 Page 93 TO SUBTRANS (2) CB461 HTR-5860 Page 93 TO SUBTRANS (2) CB459 RX-V757/DSP-AX757/DSP-AX757SE/RX-V657 Page 92 TO SUBTRANS (2) CB460...
  • Page 41 OPTIMIZER MIC AMP 11.9 10.7 -12.0 Page 86 TO DSP CB7 Page 87 TO FUNCTION (1) CB309 RX-V757/DSP-AX757/DSP-AX757SE/RX-V657 Page 92 TO SUBTRANS (2) CB456 IC801 : M66003-0131FP FL Display Driver Display code CGROM SEG00 IC901 : µPC4570G2 (8-bit x 60)
  • Page 42 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 SCHEMATIC DIAGRAM (OPERATION) HTR-5860 -22.0 -22.0 -19.5 -19.5 -21.4 -19.4 -25.0 -22.3 -19.3 -19.5 -28.8 -23.2 -25.6 DISPLAY DRIVER -15.4 -21.2 -19.5 -25.6 -21.4 -29.0 -21.3 -21.4 -26.9 -21.4 -8.2 -21.2 -26.8 Page 87 TO FUNCTION (1) CB306 -19.3...
  • Page 43: Power Supply

    RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 SCHEMATIC DIAGRAM (MAIN) TO SUBTRANS (2) CB453 RX-V757/DSP-AX757/DSP-AX757SE/RX-V657 56.3 56.1 56.3 Page 92 HTR-5860 Page 93 56.3 -0.1 55.9 -0.4 -1.0 -0.5 -12.0 -0.1 -0.5 -1.0 -0.5 -48.7 -1.0 -12.0 -56.2 -56.2 -49.3 -49.3 -49.9 56.3 56.3 55.9 -0.4...
  • Page 44 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 SCHEMATIC DIAGRAM (POWER) REGULATOR POWER SUPPLY 19.2 AC 31.1 -0.1 12.1 19.2 10.1 -20.1 0 3.3 10.1 TO POWER TRANSFORMER AC 17.5 10.1 -0.1 55.6 -55.1 -11.2 -12.1 -20.1 55.1 56.2 -0.6 -0.6 Page 90 TO MAIN (1) W8...
  • Page 45 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 DSP-AX757 RX-V757/RX-V657 DSP-AX757SE RX-V757 RX-V657 DSP-AX757 RX-V757/RX-V657 DSP-AX757SE RX-V757 RX-V657 SCHEMATIC DIAGRAM (SUBTRANS) RX-V757/DSP-AX757/DSP-AX757SE/RX-V657 Page 94 Page 87 TO CONVERSION (2) CB831 TO FUNCTION (1) CB302 Page 94 Page 87 TO POWER TRANSFORMER (U, C, T, K, A, B, G, E, J)
  • Page 46 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 HTR-5860 SCHEMATIC DIAGRAM (SUBTRANS) TO POWER CABLE TO POWER TRANSFORMER IC607, 608 : TK15420M Video Amp –IN – – –IN –V X: NOT USED AC 152.6 IC605 : LA7109 Page 87 Page 93 Page 94 75Ω Video Driver...
  • Page 47 – –IN -3.4 –V Point u (Pin 12 of IC711) DELAY LINE RX-V757 (U, C, A, G), RX-V657 (U, C, A, B, G, E) models DSP-AX757SE model IC703 : NJM2581M Page 91 TO SUBTRANS (8) CB446 IC708 : TC74HC4053AF (EL)
  • Page 48 RX-V757/DSP-AX757/DSP-AX757SE RX-V657/HTR-5860 SCHEMATIC DIAGRAM (XM) TO SUBTRANS (2) CB454 RX-V757/DSP-AX757/DSP-AX757SE/RX-V657 Page 92 HTR-5860 Page 93 RX-V757, RXV657 models BLM21P600SG 47/16 NE5532DR 47/16 0.1/16 10/16 Page 94 0.01/50 3.3K TO CONVERSION (2) W831 3.3K 10/16 NE5532DR 47/16 no_use 12.4 12.4 12.4 AC 10.3...

This manual is also suitable for:

Dsp-ax757seDsp-ax757Rx-v657Htr-5860

Table of Contents