Keys Fitness KF-R2.0 Owner's Manual page 11

www.keysfitness.com
G
5
Use Tool
E3
A SSEMBLY FOR CONSOLE
E2
Step 1:
Connect the sensor wire (e3) and the pulse wire (e2) with
6mm
the corresponding wires on the console (G).
E
Step 2:
Remove 2 screws (N14) from the back of the console (G).
M1
Step 3:
Gently push all wires into the upright post and mount the
console (G) by sliding it onto the console mounting plate
M3
at the top of the upright tube (e). Secure with 2 screws
(N14) to keep the console in place.
N14
ASSEMBLY FOR WATER BOTTLE
M2
Step 1:
Remove 2 screws (M2) from the upright post (e).
Step 2:
Install water bottle holder (M1) on the upright post and
secure it using 2 screws (M2). Place the water bottle (M3)
into the water bottle holder (M1).
Assembly 11