Printing A Sample Copy; Saving Copy Settings - Xerox WorkCentre6655 User Manual

Copying

Printing a Sample Copy

The Sample Copy feature prints a single copy of a job and holds the remaining copies. This feature
allows you to review and approve the job before you print the entire set.
Note: The sample copy is not counted as part of the quantity selected.
To print a sample copy of your job:
1. Press the Services Home button, then touch Copy.
2. Change the copy settings as needed.
Touch the Job Assembly tab, then touch Sample Job>On.
3.
4. Touch OK.
5. Press the green Start button. A sample copy prints immediately. The sample copy is not counted as
part of the print job.
6. Print the remaining copies or delete the job.
To print the remaining copies of the job, touch Release.
−
− If the sample copy is unsatisfactory, touch Delete.

Saving Copy Settings

To use a particular combination of copy settings for future copy jobs, you can save the settings with a
name and retrieve them for later use.
To save the current copy settings:
1. Press the Services Home button, then touch Copy.
Touch the Job Assembly tab, then touch Save Current Settings.
2.
3. Using the touch screen keyboard, type a name for the saved settings.
4. Touch OK.
Retrieving Saved Copy Settings
You can retrieve and use any previously saved copy settings for current jobs.
Note: To save the copy settings with a name, see
To retrieve saved settings:
1. Press the Services Home button, then touch Copy.
Touch the Job Assembly tab, then touch Retrieve Saved Settings.
2.
3. Touch the desired saved setting.
To delete a saved setting, touch the setting, then touch Delete Settings.
Note:
4. Touch Load Settings. The saved settings are loaded for the current copy job.
116 Xerox WorkCentre
®
User Guide
6655 Color Multifunction Printer
®
Saving Copy Settings on page 116.