Xerox WorkCentre6655 User Manual page 110

Copying
Specifying Chapter Start Pagination
If you select 2-sided copies, you can set each chapter to start on the front or back of the page. If
necessary, the printer leaves one side of the paper blank so that the chapter starts on the specified side
of the paper.
To set the start side of particular pages:
1. Press the Services Home button, then touch Copy.
2. Under Paper Supply, touch the tray containing the paper for the body pages of the job.
Note: If the paper supply is set to Auto Select, Chapter Starts is unavailable.
3. Touch the Output Format tab, then touch Special Pages>Chapter Starts.
On the Chapter Starts screen, touch the Page Number field, then use the alphanumeric keypad to
4.
enter the page number.
5. Under Start Chapter, select an option:
− On Right Page specifies the front side of the paper.
− On Left Page specifies the back side of the paper.
Touch Add. That page is added to the list on the right side of the screen.
6.
7. Repeat the three previous steps to set other pages.
Touch Close. The page settings appear in the list on the right side of the screen.
8.
9. Touch OK.
110 Xerox WorkCentre
®
User Guide
6655 Color Multifunction Printer
®