System Information - Planet HPOE-2400G User Manual

• Configuration Setting
• Factory Default
• System Log
• System Reboot

4.3.1 System Information

This section display system information of PoE Injector Hub, the screen in
the system information object of PoE Injector Hub.
Object
• System Name
• MAC Address
• Software Version
• Hardware Version
• Attain IP Protocol
• IP Address
• Subnet Mask
• Gateway
• Description
• System Date
• System UpTime
Table 4-3-1: Descriptions of the System Information Web page screen Objects
Allow to backup or restore system configuration.
Allow to reset system to factory default setting.
Allow to enable system log and to record system log.
4.3.8.
Allow to reboot system.
Figure 4-3-1: System Information Web page screen
Description
Display the PoE Injector Hub model name.
Display the MAC Address of PoE Injector Hub.
Display the current firmware version of PoE Injector Hub.
Display the hardware version of PoE Injector Hub.
Displays the current attain IP protocol of PoE Injector Hub.
Displays the current IP address of PoE Injector Hub.
Displays the current subnet mask address of PoE Injector Hub.
Displays the current gateway address of PoE Injector Hub.
Display the system description of PoE Injector Hub.
Display the current system date of PoE Injector Hub. The system date will correct
if NTP function was enabled and The Hub connected to Internet.
Display that when the system started up.
24
User's Manual of HPOE-1200G / HPOE2400G
Explained in section
Explained in section
Explained in section 4.3.9.
Figure 4-3-1 appears and
4.3.6.
4.3.7.
Explained in section
Table 4-3-1 describes