Table of Contents
Advertisement
System Requirements
Broadband Internet Access Service (Cable/xDSL/Ethernet connection)
One IEEE 802.3at PoE switch (supply power to the WBS-512AC)
PCs with a working Ethernet adapter and an Ethernet cable with RJ45 connectors
PCs running Windows 98/ME, NT4.0, 2000/XP, Windows Vista / Win 7, MAC OS 9 or later, Linux,
UNIX or other platforms compatible with TCP/IP protocols
1. The CPE in the following instructions refers to PLANET WBS-512AC.
2. It is recommended to use Internet Explorer 11, Firefox or Chrome to access the CPE.
Installing the CPE
Before installing the CPE, make sure your PoE switch is connected to the Internet through the broadband service
successfully at this moment. If there is any problem, please contact your local ISP. After that, please install the
AP according to the following steps. Don't forget to pull out the power plug and keep your hands dry.
Please install the AP according to the following steps. Don't forget to pull out the power plug and keep your hands
dry.
Step 1. Push the latch on the bottom of the Outdoor Wireless CPE to remove the sliding cover.
Chapter 3. Connecting to the CPE
Figure 3-1 Connect the Antenna
-12-
User Manual of WBS-512AC
Advertisement
Table of Contents
