Poe Schedule Profile Configuration Example - Planet HPOE-2400G User Manual

User's Manual of HPOE-1200G / HPOE2400G

4.5.4 PoE Schedule Profile configuration example

Please enable NTP and correct PoE hub system time first and make sure System PoE Admin Mode is enabled, otherwise
you can not configure PoE Schedule profile, you may see an error message as a screen shot as following. Screen in Figure
4-5-5.
Figure 4-5-5: Error message of PoE Schedule Profile
As default value, all PoE Schedule Profile function are disabled, but you can configure it anyway, and please enable the
function after you finished all configuration.
A situation that enterprise wants PoE port1 to port 12 connects to VoIP phone and provides power for working from AM
08:00 to PM 05:00 of five days a week. PoE port13 to 20 connects to PoE wireless AP and provides power for working from
AM 08:00 to PM 11:00 of five days a week, the other PoE port connect to PoE camera so it has to be provided power to 24
hours.
So, we can use 3 schedule profiles to satisfy the enterprise requirement as following screen shot. Screen in Figure 4-5-6.
Figure 4-5-6: PoE Schedule Profile Configuration
45