4.2 Web Panel
At the top of the Web management page, the active panel displays the link status of management port and PoE ports.
Green
lit is the network data send or receiver.
Orange
lit is the PoE in use.
Red
lit is the PoE port not enough power to enable. (It will be happened that if user assigned lower power
for PD in the Total Limit mode.)
4.3 System
The System function provides system information also allows user to manage PoE Injector Hub system. As showed in
Figure
4-2-2.
The page includes the following information:
Object
• System Information
• IP Configuration
• NTP Configuration
• Password Setting
• Firmware Upgrade
Figure 4-2-1: Web panel screen
Figure 4-2-2: System function menu
Description
Display the MAC address, Software Version, Hardware Version, IP Address,
Subnet Mask, Gateway and Description.
Allow to change the IP subnet address of PoE Injector Hub.
section
4.3.2.
Allow to set system time by manual or synchronize system time from Internet
NTP server.
Explained in section
Allow to change the username and password of PoE Injector Hub.
section
4.3.4.
Allow to upgrade the latest firmware in the future.
23
User's Manual of HPOE-1200G / HPOE2400G
Explained in section
4.3.3.
Explained in section
4.3.1.
Explained in
Explained in
4.3.5.