Aiphone IS SERIES Quik Start Programming Manual page 5

Step 6:
Set Up Host Device
A. Select Network setting from the menu on the left.
B. Click the Host unit radio button.
C. Enter the System name (max. 24 alphanumeric characters).
D. DHCP is utilized by default. Aiphone recommends assigning a static IP address by clicking the
Static IP Address radio button and entering a unique IP address and Subnet mask (see Figure 6.1).
E. Enter a Unit name for the device (This is used for identifying the unit in programming only).
F. Enter the Connection port and the Connection password for the system.
G. Click Temporarily stored to save changes.
Figure 6.1: Network Setting - Host
Step 7:
IP Unit Registration - Host
A. Select IP unit registration from the menu on the left.
B. Scroll down and click IP unit search in the lower right (see Figure 7.1).
C. Check the station(s) needing to be added to the Imported IP units list. Click
Add to the imported IP units list to add them.
Any units not appearing can be manually entered (see Figure 7.2).
Figure 7.1: IP Unit Registration - IP Unit Search
How-To
Video Link
How-To
Video Link
Figure 7.2: Manual Entry
5