Standard Repeater Frequencies - Kenwood TH-K2AT Instruction Manual

Storing Simplex Frequencies or Standard Repeater Frequencies
1 Press [VFO].
2 Turn the Tuning control to select your desired
frequency.
• You can also directly enter a desired frequency using
the keypad (TH-K2AT/ ET/ K4AT only) {page 21}.
3 If storing a standard repeater frequency, select the
following data:
• Offset direction {page 32}
• Tone function, if necessary {page 34}
• CTCSS/ DCS function, if necessary {pages 69, 73}
If storing a simplex frequency, you may select other
related data (CTCSS or DCS settings, etc.).
4 Press [F], [MR].
• A memory channel number appears and blinks.
• " " appears if the channel contains data.
• Memory channel number L0/U0 ~ L2/U2 {page 61},
Pr (Priority Channel) {page 65} and AL (Weather Alert)
{page 55} (TH-K2AT K/ K2 only) are reserved for other
functions.
5 Turn the Tuning control to select the memory
channel in which you want to store the data.
6 Press [MR] to store the data to the channel.
44