Tx Inhibit; Tx Power - Kenwood TH-K2AT Instruction Manual

Note: A warning beep sounds even if you select Menu No. 27 (BP)
OFF {page 85}.
TX I
NHIBIT
You can inhibit the transmission to prevent unauthorized
individuals from transmitting, or to eliminate accidental
transmissions while carrying the transceiver.
1 Press [MENU].
2 Turn the Tuning control to select Menu No. 25 (TXI).
3 Press [MENU].
4 Turn the Tuning control to select "ON".
5 Press [MENU] to store the setting or [PTT] to cancel.
• "TX INH" appears and an error beep sounds if the
transceiver tries to transmit while TX Inhibit is ON.
TX P
OWER
To change the transmission output power, press [F],
[PTT].
• Each time you press [F], [PTT] the icon cycles from
, and then back to
The output power varies depending on the battery type
and operating voltage. The table below shows the
approximate output power when the transceiver
operates with different types of battery or DC power
sources.
.
95