Beat Shift; Beep Function - Kenwood TH-K2AT Instruction Manual

While the transceiver is communicating in PC Mode {page107},
the Battery Saver does not function.
Battery Saver does not function while scanning.
B S
EAT HIFT
Since the transceiver uses a microprocessor to control
various functions of the transceiver, the CPU clock
oscillator's harmonics or image may appear on some
spots of the reception frequencies {page 121}. In this
case, turn the Beat Shift function ON.
1 Press [MENU].
2 Turn the Tuning control to select Menu No. 28 (BS).
3 Press [MENU].
4 Turn the Tuning control to select "ON".
5 Press [MENU] to store the setting or [PTT] to cancel.
Note: Beat Shift status can be stored to each Memory channel.
B F
EEP UNCTION
The Beep function provides confirmation of entry, error
status, and malfunctions of the transceiver. We
recommend you leave this function ON in order to detect
erroneous operations and malfunctions.
However, to turn the beep function OFF:
1 Press [MENU].
2 Turn the Tuning control to select Menu No. 27 (BP).
3 Press [MENU].
4 Turn the Tuning control to select "OFF".
85