Offset Programming Flow; Programming An Offset; Selecting An Offset Direction - Kenwood TH-K2AT Instruction Manual

O P
FFSET ROGRAMMING
q
Select a receive frequency.
w
Select an offset direction.
e
Select an offset frequency
(only when programming odd-split
repeater frequencies).
r
Activate the Tone function
(if necessary).
t
Select a tone frequency
(if necessary).
If you store all the above data in a memory channel, you
will not need to reprogram the parameters every time.
Refer to "MEMORY CHANNELS" {page 41}.

Programming an Offset

You must first select an amateur radio repeater downlink
frequency as described in "Selecting an Offset
Frequency" {page 33}.

Selecting an Offset Direction

Select whether the transmission frequency will be
higher (+) or lower (–) than the reception frequency.
32
F
LOW