Kenwood TH-K2AT Instruction Manual page 37

Example 5 (Short cut)
To change 144.650 MHz to 145.650 MHz:
Key in
[#]
[5]
[ ]
[VFO]
Example 6
To change 145.200 MHz to 145.750 MHz:
Key in
[#]
[ ]
[7], [5], [0]
Note:
If the entered frequency does not match the current
frequency step size, the frequency is automatically rounded
down to the next available frequency.
When the desired frequency cannot be entered exactly,
confirm the frequency step size {page 86}.
If you turn the Tuning control while entering the frequency,
the transceiver clears the entry and changes to the next
available frequency.
Display
1 4 4. 6 5 0
– – – – – –
5 – – – – –
1 4 5. – – –
1 4 5. 6 5 0
Display
1 4 5. 2 0 0
– – – – – –
1 4 5. – – –
1 4 5. 7 5 0
23