Confidential Print Menu - Lexmark XC2130 User Manual

Understanding the printer menus
Use
Security Reset Jumper
No Effect
Access controls="No Security"
Reset factory security defaults
LDAP Certificate Verification
Demand
Try
Allow
Never
Minimum PIN Length
1–16

Confidential Print menu

Use
Max Invalid PIN
Off
2–10
Confidential Job Expiration
Off
1 hour
4 hours
24 hours
1 week
Note: Off is the factory default setting.
To
Adjust the security settings.
Notes:
•
No Effect means the reset has no effect on the printer security configuration.
•
Access controls='No Security' retains all the security information that the user
has defined. No Security is the factory default setting.
•
"Reset factory security defaults" deletes all security information that the user
has defined, and restores the factory default settings in the Miscellaneous
Security menu.
Allow the user to request a server certificate.
Notes:
• "Demand" is the factory default setting. This means a server certificate is
requested. If a bad certificate is provided or if no certificate is provided, then
the session is terminated immediately.
•
"Try " means a server certificate is requested. If no certificate is provided, then
the session proceeds normally. If a bad certificate is provided, then the session
is terminated immediately.
•
"Allow" means a server certificate is requested. If no certificate is provided,
then the session proceeds normally. If a bad certificate is provided, then it will
be ignored and the session proceeds normally.
• "Never" means no server certificate is requested.
Limit the digit length of the personal identification number (PIN).
Note: 4 is the factory default setting.
To
Limit the number of times an invalid PIN can be entered.
Notes:
•
This menu appears only when a formatted, non-defective printer hard disk is installed.
•
Once the limit is reached, the print jobs for that user name and PIN are deleted.
Limit the amount of time a confidential print job stays in the printer before it is deleted.
Notes:
•
If the "Confidential Job Expiration" setting is changed while confidential print jobs
reside in the printer RAM or printer hard disk, then the expiration time for those print
jobs does not change to the new default value.
• If the printer is turned off, then all confidential jobs held in the printer RAM are
deleted.
140