Tray Problems - Lexmark XC2130 User Manual

Troubleshooting
Cannot detect memory card
Action
Make sure the memory card is installed.
a
Install the memory card. For more information, see
memory card" on page
Note: Check if the memory card is securely connected to the printer
controller board.
b
Print a menu settings page, and then check if the card is listed in the
Installed Options list.
Is the card listed in the Installed Options list?

Tray problems

Action
Step 1
a
Pull out the tray, and then do one or more of the following:
•
Check for paper jams or misfeeds.
• Check if the paper size indicators on the paper guides are aligned
with the paper size indicators on the tray.
•
If you are printing on custom‑size paper, then make sure that the
paper guides rest against the edges of the paper.
• Make sure the paper is below the maximum paper fill indicator.
•
Make sure paper lies flat in the tray.
b
Check if the tray closes properly.
Is the tray working?
Step 2
a
Turn off the printer, then wait about 10 seconds, and then turn the
printer back on.
b
Resend the print job.
Is the tray working?
Step 3
Check if the tray is installed and recognized by the printer.
Print a menu settings page, and then check if the tray is listed in the
Installed Features list.
Is the tray listed in the menu settings page?
28.
Yes
The problem is solved. Contact
"Installing a
Yes
The problem is solved. Go to step 2.
The problem is solved. Go to step 3.
Go to step 4.
268
No
customer
support.
No
Reinstall the tray. For
more information, see
the setup
documentation that
came with the tray.