Connecting The Device To Your Computer - Wasp HC1 User Manual

3.1.2 Connecting the Device to Your Computer

1.
After ActiveSync has been installed,
connect the HC1 to your PC as described
in Connecting the terminal to a host
(PC/Notebook).
2.
Turn the HC1 on.
3.
ActiveSync starts automatically and
configures the USB port to work with the
HC1. The New Partnership setup wizard
automatically starts.
NOTE: If ActiveSync doesn't start automatically, click Start → Programs → Microsoft
ActiveSync.
NOTE: If a message appears indicating that it is unable to detect a connection, click the
Cancel button and manually configure the communication settings.
4.
Follow the on-screen instructions.
5.
When the configuration process is
complete, the Active-Sync window
appears.
6.
Synchronization will be initialized and will take place if you've chosen to synchronize
periodically or upon connection.
NOTE: Your computer can create a partnership with multiple HC1. Also, a HC1 can create a
partnership with up to two computers.
18
Wasp HC1 User Manual