Using The Sim Card - Wasp HC1 User Manual

2.2 Using the SIM Card

The HC1 has a slot for a GPRS SIM card inside the battery compartment.
CAUTION! Before installing the SIM card, please backup your data to prevent data loss
because of a low backup battery.
2.2.1 Inserting the SIM Card
1.
Remove the battery compartment cover and the main battery.
2.
Slide the cover of the SIM card slot to the right to release the
latch.
3.
Pull open the cover with thumb.
4.
Insert the SIM card into the cover with the notched corner up,
the contact side of the SIM card facing down.
5.
Close the cover over the slot, and then slide the cover to the
left to lock the SIM card.
6.
Put the battery back into the battery compartment and replace the battery compartment
cover.
14
Wasp HC1 User Manual