Direct Tab - Motorola MC9190-G Integrator Manual

• Disconnect after sync - Sets the MC9190-G to automatically disconnect from the selected host computer
when ActiveSync completes synchronization.
• Establish network connection - Establishes a connection to the network when the MC9190-G is placed in
a cradle.
Selecting this option, automatically deselects Launch ActiveSync.
Select this option in conjunction with Launch application. After iDockIt establishes the network connection,
it launches the specified application.
Launch application - Launches the selected application when the MC9190-G is placed in the cradle. iDockIt
•
uses the specified command line parameters.
Selecting this option, automatically deselects Launch ActiveSync.
Tap Select to open the Select Auto-Launch Application window.
1.
Select a File Type in the drop-down list.
2.
Select a folder (as needed).
3.
Select a file name in the list.
4.
In the Program arguments field, enter command line parameters.
5.
Tap .
6. OK
The selected application appears in the text box.
• Serial port baud rate - Specifies the baud rate iDockIt uses for a serial connection to the Ethernet cradle.
Set this rate to match the baud rate configured for the cradle. For maximum performance, always use the
maximum baud rate of 115200.
If using a USB-to-Ethernet cradle, the USB driver automatically controls the connection speed.

Direct Tab

If using a serial or USB cradle or a serial or USB cable, automatically connect to the connected host computer or
network or choose a host computer with which to have set up a partnership using ActiveSync. Alternatively, if the
host computer supports RAS connections, connect to the network through a host computer and/or launch a
specified application on the MC9190-G.
Direct Tab
Figure B-8
Using iDockIt B - 13