C - 4
MC9190-G Integrator Guide
Battery Usage Threshold Setting
By default the Battery Usage Threshold value is set to a pre-defined value (500 by default). To change the
threshold value, a registry key must be created to allow changing this value.
A battery becomes unhealthy when the Battery Usage Indicator reaches a predefined threshold (end of usable life).
NOTE The point at which a battery becomes unhealthy may vary depending upon the environment and charging
conditions
Power BatteryMgmt Tab
Figure C-3
Registry Setting
Create the following registry key:
[HKEY_LOCAL_MACHINE\ControlPanel\Power]
"EnableCycleCntThresholdEdit"=DWORD:0
where:
dword:0 = Enable threshold change
Warm boot the MC9190-G to have the registry setting take effect.
Tap Start > Settings > System > Power > BatteryMgmt tab.
1.
or Start > Control Panel > Settings > Power > BatteryMgmt tab.