Setup; Battery Charging Indicators - Motorola MC9190-G Integrator Manual

2 - 28 MC9190-G Integrator Guide

Setup

AC Line Cord
UBC Adapter Power Connection
Figure 2-27

Battery Charging Indicators

To charge a spare battery using the UBC adapter, connect the power supply to the UBC (see
2-28), then insert the spare battery. The spare battery begins charging automatically. The UBC's charge LEDs (see
Figure 2-28)) show the status of the battery charging in the adapter.
indications. The battery usually charges in three hours.
POWER
READY or STANDBY or FAULT
(Green) (Flashing Yellow)
CHARGING
(Solid Yellow)
UBC Adapter LEDs
Figure 2-28
UBC Adapter Charge LED Status Indications
Table 2-9
LED
POWER Green
READY or Green
(Solid Yellow)
Indication
Power is connected to the UBC Adapter.
Charging complete.
DC Cable
Power Supply
Table 2-9
Description
Figure 2-27 on page
shows battery charging status