Appendix B Special Software Configurations; Battery Usage Threshold Setting; Registry Setting - Motorola MC31XX Series Integrator Manual

Appendix B Special Software

Battery Usage Threshold Setting

By default the Battery Usage Threshold value is set to a pre-defined value (400 by default). To change the
threshold value, a registry key must be created to allow changing this value.
A battery becomes unhealthy when the Battery Usage Indication reach a predefined threshold (end of usable life).
NOTE The point at which a battery becomes unhealthy may vary depending upon the environment and charging
conditions
Power BatteryMgmt Tab
Figure B-1

Registry Setting

Create the following registry key:
[HKEY_LOCAL_MACHINE\ControlPanel\Power]
"EnableCycleCntThresholdEdit"=DWORD:0
where:
dword:0 = Enable threshold change
Warm boot the MC31XX to have the registry setting take effect.
Tap Start > Settings > Power > BatteryMgmt tab.
1.
Configurations