In Case Of Difficulty - Kenwood KRF-V8030D Instruction Manual

Kenwood instruction manual audio video surround receiver krf-v8030d vr-409
Hide thumbs Also See for KRF-V8030D:
Table of Contents

Advertisement

In case of difficulty

Remote control unit
42
Symptom
The battery indicator flashes during opera-
tion.
Subwoofer volume cannot be adjusted.
Certain inputs cannot be selected using the
remote control.
Remote control operation is not possible.
Cause
• The batteries are nearing exhaustion.
• Subwoofer is OFF.
• No setup codes registered at for the respec-
tive input(s).
• The remote control is set to a different
operation mode.
• Batteries are exhausted.
• The remote control unit is too far away from
the main system, controlling angle is too
large, or there is an obstacle between the
receiver and the remote.
• The audio cords and system control cords are
not connected properly.
• No software is loaded in the source
component.
• An attempt is made to play a tape which is
being recorded in the cassette deck.
• The remote control has not been set to the
operation mode for the component you wish
to control.
• The microprocessor of the remote control
malfunctions.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.
Model __________________ Serial Number ________________________
Remedy
• Replace with new batteries to preserve the
currently registered setup information.
• Turn the subwoofer ON.
• Register a setup code or Non-IR code at the
respective input(s).
• Press the MUSIC, MOVIE, or TV keys to
select the appropriate operation mode.
• Replace with new batteries.
• Operate the remote control unit within the
controllable range.
• Connect properly referring to "Setting up the
system".
• Place software in the source component you
want to play.
• Wait until recording has completed.
• Press the MUSIC, MOVIE, or TV keys to
activate the operation mode for the
component you want to control before
operation.
• Reset the microprocessor.
$
%
RC3
$
8
RC5
§

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr-409

Table of Contents