Presetting Radio Stations Manually; Receiving Preset Stations; Receiving Preset Stations In Order - Kenwood KRF-V8030D Instruction Manual

Presetting radio stations manually

20
MULTI CONTROL
1
Tune to the station you want to store.
2
Press the MEMORY key while receiving the station.
Blinks for 5 seconds
SP A B TI.VOL
L C R
CLIP MUTE
LFE SW
RDS EON PTY
LS S RS
TP TA NEWS
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
3
Use the MULTI CONTROL to select one of the station
presets (1 – 40).
4
Press the MEMORY key to accept the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.

Receiving preset stations

MUSIC
1
Press the MUSIC key to select the tuner as the source.
2
Enter the number of the preset you want to receive (up to
"40").
Press the numeric keys in the following order:
For "15", press .......... 0,5
For "20", press .......... 0,0,)
• If you make a mistake entering a two digit number, press the +10 key
several times to return to the original display and start again.
SP A B TI.VOL
L C R
CLIP MUTE
LFE SW
RDS EON PTY
LS S RS
TP TA NEWS
MEMORY
Lights for 5 seconds
FM AUTO SOUND DIGITAL
AM PRO LOGIC S.DIRECT
MHz 3 STEREO MONITOR
kHz DOWN MIX DSP
Numeric keys
FM AUTO SOUND DIGITAL
AM PRO LOGIC S.DIRECT
MHz 3 STEREO MONITOR
kHz DOWN MIX DSP

Receiving preset stations in order

1
Use the MUSIC key to select the tuner as the source.
AUTO
MEMO
2
ST.
Use the 4 / ¢ keys to select the desired station.
TUNED
• Each time you press the key, another preset station is received in
order.
Pressing the ¢ key does the following:
01=02=03= ...... 38=39=40=01=02=03=
Pressing the 4 key does the following:
01+02+03+ ...... 38+39+40+01+02+03+
Holding down the key, lets you skip through the presets, receiv-
ing each for 0.5 seconds apiece.
AUTO
MEMO
ST.
TUNED
Listening to radio broadcasts
MUSIC
4/¢
(P.CALL)