Executing An Automatic Operation - Kenwood KRF-V8030D Instruction Manual

Executing an automatic operation

MACRO
During opration, make sure you start the next step within 8
seconds of completing the previous one. If more than 8
seconds elapses between any two steps, press the display
operation key so that the display appears.
1
Press the MACRO key.
• "MACRO EXE" appears in the display.
MACRO EXE
Select MACRO
Menu
2
Press the MUSIC, MOVIE, or TV key to execute the
corresponding macro play.
• "MACRO EXE" appears in the display and the pre-programmed macro
is performed:
MUSIC = "MACRO 1", MOVIE = "MACRO 2", TV = "MACRO 3"
• Some devices take up to 1 second to power on. The macro function
has an automatic delay after any power function output.
• Pressing a key other than MUSIC, MOVIE, or TV cancels the macro
program mode.
MACRO1 EXE
Select MACRO
Menu
When MUSIC is pressed
MUSIC, MOVIE,
TV
+ +
– –
Getting the most from your remote control
To delete the setup code
Display operation 1
Display operation 2
During opration, make sure you start the next step within 8
seconds of completing the previous one. If more than 8
seconds elapses between any two steps, press the display
operation key so that the display appears.
1
Press the display operation 1 key repeatedly until
" Menu " appears in the display.
Video1:
VCR
Menu
2
Press the [Menu] key repeatedly until " 01.IR " appears
in the display.
• The setup display appears.
>01.IR
>02.Surround
Home Enter
3
Press the 5 / ∞ keys to select " 01.IR ," then press the
[Enter] key.
• The input selecting display appears.
>03.Video1
>04.Video2
Back Enter
4
Press the 5 / ∞ keys to select the input that you want to
delete, then press the [Enter] key.
5
Press the 5 / ∞ keys to select " Delete ."
>13:Delete
>01:CD
Back Enter
6
Press [Enter].
• The setup code is deleted.
5/∞
+ +
– –
35