Dvd 6-Channel Playback; Convenient Functions - Kenwood KRF-V8030D Instruction Manual

Kenwood instruction manual audio video surround receiver krf-v8030d vr-409
Hide thumbs Also See for KRF-V8030D:
Table of Contents

Advertisement

DVD 6-channel playback

24
Using a DVD player or the like equipped with six (5.1) output channels and
the receiver, you can enjoy surround sound playback.
When you try to play a disc other than Dolby Digital (AC-3) such as DTS
CD, no sound is produced or, noise may be heard. To avoid this situation,
make sure that you connect the component to the receiver's DVD 6CH.
INPUT jacks through a surround processor which can decode the
surround signal you wont to listen to.
Connecting a DVD player which can decode the surround signal itself is
also acceptable.
INPUT MODE
MOVIE
Preparations
• Connect your DVD player to the DVD 6ch jacks of the receiver.
• Turn on all other components that will be used.
• Complete "Preparing for surround sound".
1
Select "DVD/6ch" as the input source.
• If speaker system B is on when "DVD/6ch" is selected as the input
source, it switches off and speaker system A turns on automatically.
2
Select "6CH INPT" by pressing the INPUT MODE key.
3
Start playback of the DVD software.
4
Adjust the volume.
• It is not possible individually to adjust the volume level or sound quality
(SETUP, SOUND) of the separate channels when the receiver is in the
DVD 6ch mode. Adjust the volume with the controls of the DVD player.
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer's own volume control.
INPUT SELECTOR
8
$

Convenient functions

DIMMER
MULTI CONTROL
SOUND LISTEN MODE
LISTEN.M
SOUND
Adjusting the sound
You can make further adjustments to the sound while listening to playback
in the surround mode.
1 Press the SOUND key to select the item you want to adjust.
Each press switches the selection as listed below.
Note that some items are not displayed in certain modes.
1BASS (low frequency range sound quality adjustment)
2TREB (high frequency range sound quality adjustment)
3Cch (center speaker level adjustment)
4RS (right surround speaker level adjustment)
5LS (left surround speaker level adjustment)
6SW (subwoofer level adjustment)
7INPUT (input level adjustment)
8NIGHT (midnight mode on/off)
9CINEMA/MUSIC (select the circle surround mode)
2 Use the MULTI CONTROL knob or the 5/∞ keys to adjust the
setting as desired.
• The adjustment item is displayed for approximately 8 seconds.
Ambience effects
VOLUME
5/∞
VOLUME +/–
SUB. W.
&
&
%

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr-409

Table of Contents