Type Vitosolic - Viessmann Vitocal 300-G Installation And Service Instructions Manual

External Blocking/mixer CLOSE
No. Function to the associated setting
0 M2/M3: Heating circuits with mixer
No heat pump blocking
1 M2: Heating circuit with mixer
M3: Heating circuit with mixer
No heat pump blocking
2 M2: Heating circuit with mixer
M3: Heating circuit with mixer
No heat pump blocking
3 M2/M3: Heating circuits with mixer
No heat pump blocking
4 M2/M3: Heating circuits with mixer
Heat pump blocking
5 M2: Heating circuit with mixer
M3: Heating circuit with mixer
Heat pump blocking
6 M2: Heating circuit with mixer
M3: Heating circuit with mixer
Heat pump blocking
7 M2/M3: Heating circuits with mixer
Heat pump blocking
8 Blocking of cooling with AC-Box
M2/M3: Heating circuits with mixer
Heat pump blocking

Type Vitosolic

Parameter
7016
Access
"Device settings"
"Programming"
"System definition"
y to"Vitosolic type"
l or m
Standard setting
(cont.)
control mode
moves into the CLOSE position
control mode
control mode
moves into the CLOSE position
move into the CLOSE position
control mode
moves into the CLOSE position
control mode
control mode
moves into the CLOSE position
move into the CLOSE position
control mode
Determination which type of Vitosolic
(100 or 200) is installed in the system.
Setting range
Settings explained:
0 No solar control unit Vitosolic
1 Vitosolic 100
2 Vitosolic 200
0
System definition control settings
0 to 2
145