System Resetting/Resetting Camera Functions; List Of Items To Be Reset - Hitachi DZ-GX5020A K Service Manual

Troubleshooting > System Resetting/Resetting Camera Functions

4-7 System Resetting/Resetting Camera Functions

The DVD video camera/recorder has two types of reset function: "System reset" and "Resetting
camera functions". The reset operation will return the various settings to the defaults when the
DVD video camera/recorder was shipped form factory.

4-7-1 List of items to be reset

Table 4-7-1 shows the items that will be reset to defaults at the factory by the two types of reset
operation: "system reset" and "resetting camera functions". Check the settings of the received
device.
Use the memo column in the table to enter the settings of any received device.
(1) Procedure for checking settings
1) Set the power switch to "OFF" and use a battery or the AC
adapter/charger to power the DVD video camera/recorder.
2) Insert a DVD-RAM, and then set the power switch to "VIDEO".
For subsequent steps, operate the DVD video camera/recorder
while viewing the LCD monitor or viewfi nder.
3) Press the MENU button and make sure that "Menu: Full MenU"
is specifi ed on the Camera Functions Setup menu screen.
If "Menu: Quick Menu" is specifi ed, use the
and buttons to set it to "Full Menu".
4) Operate the /
the record function setup, date function setup, EVF/LCD setup
and initial setup, in sequence, making sure of the settings.
At this time, the items on photo quality, and self-timer will not
appear, since they are related to photo recording: Check them in
steps 6) and 7).
5) Set the power switch to "CARD PHOTO". It is not necessary to
insert a card at this time.
6) Press the MENU button to display the camera function setup
screen, and then operate the
display the record function setup screen in order to check the
settings on photo quality, and self-timer.
7) After checking is complete, press the MENU button to restore
the ordinary screen.
/ / buttons to display the screens for
/ / /
4 - 35
/ / /
buttons to
Fig. 4-7-1 Example of setup
Camera Functions Setup
Menu Full Menu
Auto
Program AE
Auto
White Bal.
On
EIS
Dig. Zoom 40x
Off
MIC. Filter
ENTER RETURN
Record Functions Setup
VIDEO Mode FINE
16:9 On
Input Source CAMERA
OSD Output On
ENTER RETURN
Date Setup
Date Set
Date Mode M/D/Y
ENTER RETURN
LCD/EVF Setup
LCD/EVF Adjust
EVF Display Auto
ENTER RETURN
Initial Setup
Beep On
Off
Power Save
On
Record LED
English
Language
Auto
Demo Mode
Reset
ENTER RETURN
screens