System Resetting/Resetting Camera Functions; List Of Items To Be Reset - Hitachi DZ-HS303A Service Manual

Troubleshooting > System Resetting/Resetting Camera Functions

4-7 System Resetting/Resetting Camera Functions

The DVD video camera/recorder has two types of reset function: "System reset" and "Resetting
camera functions". The reset operation will return the various settings to the defaults when the
DVD video camera/recorder was shipped form factory.

4-7-1 List of items to be reset

Table 4-7-1 shows the items that will be reset to defaults at the factory by the two types of reset
operation: "system reset" and "resetting camera functions". Check the settings of the received
device.
Use the memo column in the table to enter the settings of any received device.
(1) Procedure for checking settings
1) Set the power switch to "OFF" and use a battery or the AC
adapter/charger to power the DVD video camera/recorder.
2) Insert a DVD-RAM, and then set the power switch to "DVD". For
subsequent steps, operate the DVD video camera/recorder while
viewing the LCD monitor or viewfi nder.
3) Press the MENU button to display the Camera Functions Setup
screen, and then check the settings. Do not press the QUICK
MENU button at this time: The settings cannot be confi rmed.
4) Operate the /
the record function setup, date function setup, EVF/LCD setup
and initial setup, in sequence, making sure of the settings.
At this time, the instructions on still recording will not appear:
Check them in steps 6) and 7).
5) Set the power switch to "SD". It is not necessary to insert a card
at this time.
6) With the DZ-HS303A, press the MENU button to display the
Camera Functions Setup screen, and then check the setting on
built-in fl ash.
7) Use the / /
Setup screen, and then check the settings on photo quality, self-
timer, etc.
8) After checking is complete, press the STOP/CANCEL or MENU
button to restore the ordinary screen.
Information:
The menu item "HDD Protection", displayed on the Record
Functions Setup screen when the power switch is set to "HDD",
will automatically switch to "On" when the DVD video camera/
recorder is turned on again, even if it has been set to "Off".
/ / buttons to display the screens for
/ buttons to display the Record Functions
4 - 40
Camera Functions Setup
Program AE Auto
Auto
White Bal.
On
EIS
40x
Dig. Zoom
MIC. Filter Off
ENTER RETURN
Record Functions Setup
VIDEO Mode FINE
16:9 On
On
OSD Output
ENTER RETURN
Date Setup
Date Set
Date Mode M/D/Y
ENTER RETURN
LCD/EVF Setup
LCD/EVF Adjust
EVF Display Auto
ENTER RETURN
Initial Setup
Beep On
Off
Power Save
On
Record LED
English
Language
Auto
Demo Mode
Reset
ENTER RETURN
Fig. 4-7-1 Example of setup
screens