L Block - Hitachi DZ-GX5020A K Service Manual

Disassembly and Reassembly > Disassembly

(3) L Block

1) Remove the six screws [A].
2) Open the jack cover (e) and then remove the
screw [G].
3) Open the L block in the direction of the arrow
from the rear side.
Take care at this time that the LMF2-L/
LMF3-L circuit board and two speaker
cables between the L and R blocks do not get
disconnected.
4) Unplug the speaker cable connector (c).
5) Remove the LMF2-L/LMF3-L circuit board (d)
in the direction of the arrow.
Caution during disassembly and reassembly:
Securely plug the connector (speaker cable
connector) into the LMF2-L/LMF3-L circuit
board.
(a) L block
(b) R block
(c) Connector of speaker cables
(d) LMF2-L/LMF3-L circuit board
(e) Jack cover
2) [G]
4)
(d)
(e)
5)
Fig. 5-3-3
5 - 4
1) [A]
1) [A]
2) [G]
1) [A]
Detailed view of screw positions
(b)
1) [A]
1) [A]
(d)
1) [A]
[A] M1.7×4
(Silver)
[G] M1.7×4
(Silver)
(a)
(c)
3)