Front Block - Hitachi DZ-GX5020A K Service Manual

Disassembly and Reassembly > Disassembly

(4) Front Block

1) Remove the AVJ2-L/AVJ3-L circuit board (c)
from MAN circuit board (b) in the direction of
the arrow.
2) Open the jack cover (d) and then remove the
four screws [A].
3) With DZ-GX5080A, remove the screw [G]
4) Remove the front block (a) in the direction of
the arrow.
(a) Front block
(b) MAN circuit board
(c) AVJ2-L/AVJ3-L circuit board
(d) Jack cover
(e) FRT2-L/FRT3-L circuit board
3) [G]
[GX5080A]
2) [A]
2) [A]
(a)
1)
2) [A]
4)
2) [A]
(d)
Fig. 5-3-4
5 - 5
Front right side
(b)
[A] M1.7×4
(Silver)
(c)
[G] M1.7×4
(Silver)
2) [A]
3) [G]
[GX5080A]