Disc Load Check Flowchart - Hitachi DZ-GX5020A K Service Manual

Troubleshooting > Display of Error Codes and Troubleshooting

4-3-4 Disc Load Check Flowchart

Check the following only when an instruction for referring to this chart is given in "Table 4-3-1
Major Error Codes and Troubleshooting" on the previous item.
Caution
Laser light striking the eye may cause your eyesight to be lost: For safety, be sure to remove any power
supply (AC adapter/charger, battery, etc.) from the DVD video camera/recorder before starting work.
Check the disc loaded status.
Is disc usable on the
DVD video camera/
recorder loaded?
Is a single-sided
disc used?
Is disc properly
attached to the
turntable?
Is there a foreign
object in the vicinity
of turntable?
Is turntable damaged?
Is optical pickup dirty?
Replace the DVD drive
unit.
Load a usable disc in
No
the DVD video camera/
recorder.
Yes
Is disc loaded with the
Yes
recording surface facing
the optical pickup?
No
Push the disc onto the
No
turntable until a click is
heard.
Yes
Yes
Remove the foreign
object.
No
Yes
Replace the DVD drive
unit.
No
Yes
Clean the optical
(*1)
pickup .
No
*1: Refer to "4-3-5 Cleaning disc and optical pickup"
Fig. 4-3-2 Disc Load Check Flowchart
4 - 15
Load the disc with the
No
recording surface facing
the optical pickup.
Yes