System Resetting/Resetting Camera Functions; List Of Setting Items To Be Reset - Hitachi DZ-MV350A Service Manual

Troubleshooting > System Resetting/Resetting Camera Functions

4-2 System Resetting/Resetting Camera Functions

The DZ-MV350A has two types of reset function: "System reset" and "Resetting camera functions".
The reset operation will return the various settings to the defaults when the DZ-MV350A was
shipped form factory.
Information:
If a defect occurs in product, take note of settings, and then execute system reset first: The defect
may disappear.

4-2-1 List of setting items to be reset

Table 4-2-1 shows the setting items that will be reset to defaults at the factory by the two types of
reset operation: "system reset" and "resetting camera functions".
Utilize the memo column and note column provided in the table to enter the settings of any received
device.
System
Item
reset
Program AE Yes
White Balance Yes
Electronic Image Yes
Stabilizer (EIS)
Dig. Zoom Yes
MIC Filter Yes
VIDEO Mode Yes
Quality Yes
Input Source Yes
PHOTO Input Yes
Self Timer Yes
OSD Output Yes
Refer to the next page for Date Setup, LCD Setup and Initial Setup items.
Table 4-2-1 Settings to Be Reset (1/2)
Camera
Default at
function
factory
reset
Camera Functions Setup
Yes Auto Auto, Sports, Portrait,
Spotlight, Sand & Snow,
Low Light
Yes Auto Auto, Set, Outdoor,
Indoor 1, Indoor 2
Yes On On, Off
Yes 40× 240×, 40×, Off
Yes Off Off, On
Record Functions Setup
Yes FINE With DVD-RAM disc:
With DVD-R disc:
Yes FINE FINE, NORM, ECO
Yes CAMERA CAMERA, LINE
Yes Field Frame, Field
Yes Off On, Off
Yes On On, Off
4 - 2
Setting range Remarks
Displayed
when disc is
used
Displayed
XTRA, FINE, STD when disc is
used
FINE, STD, LPCM
Displayed
when card is
used
Displayed
when DVD-
RAM disc or
card is used
Yes: Will be reset
No: Will not be reset
Memo