System Resetting/Resetting Camera Functions; List Of Items To Be Reset - Hitachi DZ-GX20MA Service Manual

Troubleshooting > System Resetting/Resetting Camera Functions

4-8 System Resetting/Resetting Camera Functions

The DVD video camera/recorder has two types of reset function: "System reset" and "Resetting
camera functions". The reset operation will return the various settings to the defaults when the
DVD video camera/recorder was shipped form factory.

4-8-1 List of items to be reset

Table 4-8-1 shows the items that will be reset to defaults at the factory by the two types of reset
operation: "system reset" and "resetting camera functions". Check the settings of the received
device.
Use the memo column in the table to enter the settings of any received device.
(1) Procedure for checking settings
1) Set the power switch to "OFF" and use a battery or the AC adapter/
charger to power the DVD video camera/recorder.
2) Insert a DVD-RAM, and then set the power switch to "VIDEO". For
subsequent steps, operate the DVD video camera/recorder while
viewing the LCD monitor or viewfinder.
3) Press the MENU button to display the camera function setup screen:
Make sure of the settings.
Do not press the QUICK MENU button at this time: Pressing the
QUICK MENU button will not allow you to check the settings.
4) Operate the /
record function setup, date function setup, EVF/LCD setup and
initial setup, in sequence, making sure of the settings.
At this time, the items on photo quality, external photo input and
self-timer will not appear, since they are related to photo recording:
Check them in steps 6) and 7).
5) Set the power switch to "CARD PHOTO". It is not necessary to insert
a card at this time.
6) Press the MENU button to display the camera function setup screen,
and then operate the
function setup screen in order to check the settings on flash (DZ-
GX20MA only), photo quality, external photo input and self-timer.
7) After checking is complete, press the MENU button to restore the
ordinary screen.
/ / buttons to display the screens for the
/ / / buttons to display the record
4 - 44
Camera Function Setup
Program AE : Auto
White Bal.
: Auto
EIS : On
Dig. Zoom : 40x
MIC. Filter : Off
ENTER RETURN
Record Function Setup
VIDEO mode : FINE
16:9 : Off
Input Source : CAMERA
OSD Output : On
ENTER RETURN
Date Setup
Date Set
Date mode : M/D/Y
ENTER RETURN
LCD/EVF Setup
Adjust
EVF Display : Auto
ENTER RETURN
Initial Setup
Beep : On
Power Save : Off
Record LED : On
Language : English
Demo Mode : Auto
Reset
ENTER RETURN
Fig. 4-8-1 Example of setup
screens