Ariens ZOOM 915055-1944 Owner's/Operator's Manual page 20

ADJUSTING ANTI-SCALP
ROLLER
NOTE: The anti-scalp rollers are intended to
prevent lawn scalping, not to control cutting
height. All anti-scalp rollers should be set at
the same height.
See figure 16 for anti-scalp locations on
models 915067, 055, 057, 059, 501. See
figure 17 for anti-scalp locations on models
915065 and 502.
There are two positions:
• Highest Position: Use to disable
anti-scalp feature.
• Lowest Position: Use for all cutting
positions.
In the lowest position the anti-scalp rollers will
touch the ground.
Models 915067, 055, 057, 059, 501
3
2
1
1. Anti-scalp
Roller
Figure 16
1
3
2
2. Lowest Position
3. Highest
Position
OE0038
Models 915065 and 502
3
2
1. Anti-scalp Roller
2. Lowest Position
SERVING BATTERY
NOTE: Unit comes equipped with a
maintenance-free battery that requires no
regular maintenance except cleaning the
terminals.
WARNING: Battery posts, terminals
and related accessories contain lead
and lead compounds, chemicals
known to the State of California to
cause cancer and reproductive harm.
Wash hands after handling.
Battery Removal and Installation
Remove (Figure 18)
1. Tip seat forward (see TIPPING SEAT
FORWARD on page 16).
2. Disconnect negative (–) cable first, then
positive (+) cable.
3. Remove battery hold-down bracket and
battery from unit.
Install (Figure 18)
1. Install battery on the unit with battery
hold-down bracket.
2. Connect positive (+) cable first, then
negative (–) cable.
3. Apply petroleum jelly or dielectric grease
to battery cable ends and terminals.
GB - 20
3. Highest Position
Figure 17
1
OE0310