Heating circuit control settings
Room temperature hook-up
Preconditions: Room temperature sensor installed and enabled.
This setting determines when the room temperature hook-up should be enabled
in addition to the weather-compensated control.
Settings:
0
No room temperature hook-up
1
Room temperature hook-up only in reduced mode
2
Room temperature hook-up only in standard mode
3
Room temperature hook-up in standard and in reduced mode
Access
&
"Device settings"
&
"Programming"
&
"Heating circuit"
Start optimisation
Operating instructions
Maximum flow temperature correction
Preconditions: Room temperature sensor installed and enabled.
Setting the maximum value, by which the flow temperature can be modified by
the room temperature hook-up.
158
&
"Heating circuit 1/2"
&
"Room temp. hook-up"
(l/m)
Standard setting
Setting range
0
0 to 3