Room Temperature Sensor - Viessmann Vitocal 200-G Installation And Service Instructions Manual

Excess reaction
(cont.)
Access
& "Device settings"
& "Programming"
& "Heating circuit"

Room temperature sensor

If a room temperature sensor is installed, it must be activated for the relevant
heating circuit.
For more information on the use of room temperature sensors and remote con-
trols, see page 77.
Access
& "Device settings"
& "Programming"
& "Heating circuit"
Slope; room temperature hook-up
The slope for room temperature hook-up can be selected, subject to a room
temperature sensor being installed and enabled and room temperature hook-up
being enabled (see page 158).
The higher the selected value, the greater the influence of the room tempera-
ture.
Access
& "Device settings"
& "Programming"
& "Heating circuit"
Heating circuit control settings
& "Heating circuit 1/2"
& "Excess reaction"
(l/m)
Standard setting
Setting range
& "Heating circuit 1/2"
& "Room temperature sensor"
("YES"/"NO")
Standard setting
Setting range
& "Heating circuit 1/2"
& "Heat. room hook-up"
(l/m)
Standard setting
Setting range
2
0 to 2
NO
YES/NO
10
0 to 10
157