Adjusting The Room Temperature Setting A Permanent Room Temperature - Viessmann vitocal 300-g Operating Instructions Manual

Adjusting the room temperature
Setting a permanent room temperature
Note
If a remote control (e.g. Vitotrol 200) is
connected to a heating circuit, the room
temperature set at the remote control
applies to this heating circuit.
Selecting a reduced room temperature
In the delivered condition, the reduced room temperature is set to 16 °C with the rotary
selector m preset to its centre position. The preset temperature for the centre position
of the rotary selector can be programmed separately for every heating circuit (see
page 22).
You can adjust this temperature by ±5 °C in 1 °C steps at the rotary selector m, without
altering the programmed values (see page 22).
Altering programmed standard and reduced room temperatures
In this menu, you can alter the temperature when rotary selectors s and m are in
their centre position.
22
(cont.)
Select the required temperature at the
rotary selector s.
If several heating circuits are installed,
this change will affect all heating cir-
cuits.
Select the required temperature at the
rotary selector m.
If several heating circuits are installed,
this change will affect all heating cir-
cuits.